Digital modes are where a lot of the real activity on the bands is now. FT8 makes contacts on days when SSB can’t, Winlink moves email when the internet is down, and DMR puts a worldwide talk group in your pocket. This guide collects everything on QSO Journey about digital modes: the interfaces and software, FT8 and JS8Call, keyboard modes, Winlink, digital voice, APRS, and programming your radio.

Free tools

Free Digital Tools

Build a codeplug or a channel list without fighting the vendor software.

First steps

Getting Started with Digital

Every HF digital mode needs the same three things: audio between the radio and the computer, rig control so the software can key the radio, and an accurate clock. Some radios have the interface built in, and others need a Digirig or something like it.

Get that part right once and every mode on this page gets easier.

Weak-signal HF

FT8 and JS8Call

FT8 is the mode most HF operators try first. It works when signals are too weak to hear, which is why it fills the bands on poor propagation days. JS8Call uses the same weak-signal idea for keyboard conversations and messages.

Start with WSJT-X itself, then the helper apps and the setup guide for your radio.

Keyboard to keyboard

Keyboard Modes and Packet

Before FT8 there were PSK31, RTTY and Olivia, and they are still the modes for a real typed conversation. Packet radio is where amateur digital started, and it is still useful for local networks and APRS.

Fldigi runs most of these modes, and Nexus tries to wrap a whole digital station into one program.

Digital voice

DMR

DMR is the cheapest way into digital voice, and with a hotspot you don’t even need a DMR repeater nearby. The learning curve is the codeplug, so a good share of these posts is about building one.

Get a DMR ID first, then pick a network and load a codeplug that works.

Digital voice

D-STAR, Fusion, and Other Digital Voice

Icom has D-STAR, Yaesu has System Fusion, and public safety runs P25. Each one has its own repeaters, its own linking network, and its own radios.

Compare them first, then dig into the one your local repeaters support.

Position and messaging

APRS

APRS sends your position, short messages and weather data through a network of digipeaters and internet gateways. Plenty of handhelds and mobiles have it built in, and some others can pair with a phone app over Bluetooth.

Learn how the network works, then set it up on the radio you own.

Channels and memories

Programming Your Radio

Programming a radio by hand is fine for one repeater and painful for fifty. CHIRP is free and handles most analog handhelds and mobiles, and RT Systems covers a lot of the radios CHIRP doesn’t.

The free tools at the top of this page can build the channel list for you.

Receive only

SDR and Listening

A cheap SDR dongle and a laptop will show you a slice of spectrum as a waterfall, and that teaches you a lot about how signals look before you ever transmit.

It also opens up airband and public safety scanning.

Keep going

Where to Go From Here

Digital modes are one part of operating. These guides cover the rest.


0 0 votes
Article Rating
Subscribe
Notify of
guest

0 Comments
Oldest
Newest Most Voted
0
Would love your thoughts, please comment.x
()
x
×