How to Use the Power Calculator
Power is what ends most field activations and most grid-down plans. The radio is fine, the battery isn’t. This calculator has three tabs for the three questions I get asked most.
- Battery: how long a battery runs your radio and accessories. Enter the receive and transmit current, how much of the time you transmit, and the chemistry (LiFePO4, AGM or lithium-ion).
- Solar: the panel and charge controller size you need to keep up with that load, based on your sun hours and how many days of backup you want.
- Wire: the DC wire gauge for a run, from the current and the length, so you don’t lose voltage on the way to the radio.
Why does the transmit percentage matter so much?
A 100 watt HF radio draws about an amp on receive and around 20 amps on transmit. Listening is cheap and transmitting isn’t. Digital modes like FT8 and JS8Call are key-down for the whole transmission, so they drain a battery much faster than voice at the same power setting. Turn the power down for digital.
Why can’t I use the whole battery?
You can use most of a LiFePO4 battery, but running a lead-acid or AGM battery flat shortens its life a lot, so plan on about half its rated capacity. The calculator accounts for that when you pick the chemistry.
Does the laptop count?
Yes, and it’s often the biggest draw on a digital station. Add it as an accessory. I go through a real power budget, including a Raspberry Pi and a laptop, in Why HF Radio Matters Most When the Grid Goes Down.
