Part of our Building Your First Ham Radio Station guide.

Two things trip up new hams when they look at a band chart. The first is assuming the band plan carries the same legal weight as the FCC’s frequency allocations. The second is assuming the band edges they memorized apply everywhere. Neither is true, and knowing the difference keeps you legal at home and makes a lot more sense of what you hear when you work DX. My interactive Band Plan shows your privileges by license class.

Jump to: Allocations vs band plans · ITU regions

Band Plans vs Frequency Allocations: What’s Actually Different

Table comparing FCC allocations and band plan conventions on 20 meters

Frequency allocations: the actual law

The FCC’s allocations in Part 97 define exactly which frequencies amateurs can legally use, with mode and power restrictions tied to license class. These are enforceable federal regulations. Operating outside your privileges is a real violation with real consequences, not a breach of etiquette. For what those consequences look like, see Understanding FCC Enforcement.

Band plans: voluntary convention

Within those allocations, the ARRL and other groups publish band plans that subdivide each band into suggested segments: digital here, SSB there, DX windows in another spot. Band plans aren’t FCC law. They’re voluntary agreements the ham community follows so different activities don’t constantly collide, a well-respected gentleman’s agreement rather than an enforceable rule.

Why the distinction matters

Because band plans aren’t law, plenty of band plan breaches are perfectly legal. Parking a long ragchew on 14.300 MHz, which emergency and maritime nets use, breaks no FCC rule, but you’ll get plenty of annoyed responses, because ignoring the convention disrupts activity everyone else has organized around. Be careful with the obvious example, though: the 20 meter FT8 frequency, 14.074 MHz, sits in the CW and data segment where the FCC doesn’t allow phone at all, so SSB there is an actual rule violation, not just bad manners. And deliberately interfering with other stations is illegal no matter what the band plan says.

Frequency (MHz)FCC allocation (law)Band plan (convention)
14.000 to 14.150CW and data only, no phoneCW, digital modes, FT8 at 14.074
14.150 to 14.350Phone allowed: Extra from 14.150, Advanced from 14.175, General from 14.225SSB
14.300PhoneEmergency and maritime nets
  • Know your FCC allocations cold. They’re the legal boundaries for your license class.
  • Learn your band’s ARRL band plan as a courtesy. Following it keeps the band usable for everyone.
  • When they conflict with your plans, allocations are the hard legal line, and band plans are the community’s good practice inside it.

ITU Regions: Why Your Band Plan Isn’t Universal

The band edges you’ve memorized for US amateur radio aren’t universal. The International Telecommunication Union divides the world into three regions, and band plans, and sometimes which frequencies amateurs get at all, differ between them.

The three ITU regions and where band plans differ, including 40 and 60 meters

Region 1 covers Europe, Africa, the Middle East and most of the former Soviet Union. Region 2 covers North and South America, including the US, plus Greenland. Region 3 covers most of Asia and Oceania. Each region negotiates its own allocations at World Radiocommunication Conferences, which is why a band that exists cleanly in one region might be split differently, or not exist at all, in another.

BandRegion 1Region 2 (US)Region 3
40 m7.000 to 7.200 MHz7.000 to 7.300 MHz7.000 to 7.200 MHz
80 m3.500 to 3.800 MHz3.500 to 4.000 MHz3.500 to 3.900 MHz
60 m5.3515 to 5.3665 MHz in many countriesUS channels plus the 5.3515 to 5.3665 MHz segmentVaries by country

The 40 meter split is the one you notice first on the air. Region 1 and 3 stations can only transmit up to 7.200 MHz, so working a European on 40 meter SSB often means listening for them below 7.200 while you transmit higher in the US phone segment. That’s a common split setup, and it’s why you’ll hear Europeans call “listening 7.230” or similar. (If split is new to you, see Split Operating and Pileups.)

60 meters is a patchwork. The 2015 World Radiocommunication Conference created a small worldwide secondary allocation from 5.3515 to 5.3665 MHz, but each country decides whether to adopt it, at what power and alongside which extra channels. In the US, hams have the legacy channels plus that segment.

Why this matters for your operating

When you’re working DX, the station on the other end may be operating under different band edges and mode restrictions than you are, which is part of why some activity shows up where you wouldn’t expect it on your own region’s plan. If you ever operate from another country, visiting or under a reciprocal arrangement, checking that region’s band plan before transmitting is essential. Each region has its own IARU band plan (the ARRL plan sits within the IARU Region 2 plan), and the country’s national regulator still has the final word.

Related reading: Ham Radio Cheat Sheet · Why 20 Meters Is the King of DX Bands · 40 Meters: The Band Many Hams Live On


0 0 votes
Article Rating
Subscribe
Notify of
guest

0 Comments
Oldest
Newest Most Voted
0
Would love your thoughts, please comment.x
()
x
×