The IC-7300 Mark II is the radio I point most new and upgrading hams toward when they want a proper 100W base station with a real touchscreen and an easy path into digital modes. This page rounds up everything I’ve written about it.
Start Here
- Icom IC-7300 vs IC-7300 Mark II, and How Both Compare to the G90 and FT-891, what actually changed in the Mark II and where it lands against the rest of the lineup.
Setup & Configuration
- IC-7300 Mark II Menu Deep Dive: Settings Worth Changing from Default
- Setting Up HDMI Output: Running the Spectrum Scope on an External Monitor
- IC-7300 Mark II CAT Control Setup with Ham Radio Deluxe
- Understanding the Mark II’s Dual USB-C Virtual COM Ports
- Getting the Most from the Mark II’s Built-In Antenna Tuner
- Customizing the Touchscreen and Function Keys for Faster Operating
Remote Operation & Networking
- Setting Up RS-BA1 for Remote Operation over the Built-In LAN Port
- Remote Operating the IC-7300 Mark II from Another Room in the House
- Securing Your IC-7300 Mark II on the Network: Firewall and Port Forwarding Basics
Digital Modes
- Getting on FT8 with the Icom IC-7300 Mark II
- GridTracker and the IC-7300 Mark II: Logging FT8 Automatically
- Troubleshooting IC-7300 Mark II Digital Mode Audio Issues
- Using Dual Watch for Split Digital Operating
Operating Skills
- Working DX Pileups and Split Operation on the IC-7300 Mark II
- IC-7300 Mark II Audio Settings for Cleaner SSB
- Contesting with the IC-7300 Mark II: Menu and Setup Tips for Faster Runs
- Using the Real-Time Spectrum Scope to Find Band Openings Faster
- Understanding RMDR: Why the Mark II’s Receiver Improvements Actually Matter
Antenna & RF
- Using the Separate RX Antenna Ports for an External Preamp or Filter
- Pairing the IC-7300 Mark II with an External Tuner for Non-Resonant Antennas
- Grounding and RFI Prevention for the IC-7300 Mark II Shack Setup
Maintenance & Troubleshooting
- Common IC-7300 Mark II Problems and How to Solve Them
- Updating IC-7300 Mark II Firmware: Why and How
- IC-7300 Mark II Care and Feeding: Cooling, Cleaning, and Long-Term Reliability
Comparisons & Buying Guidance
- Should You Upgrade from the Original IC-7300 to the Mark II?
- IC-7300 Mark II vs Icom’s Higher-End Radios: When You Actually Need More
- Used IC-7300 Pricing After the Mark II Launch: Is the Original Still Worth Buying?
Accessories
- Best Microphones and Headsets for the IC-7300 Mark II
- SD Card Logging and Recording on the IC-7300 Mark II: What It’s Actually For
- Power Supply Considerations for the IC-7300 Mark II Shack Setup
Related Reading
- My Recommended First Ham Radio Station, where the IC-7300 Mark II anchors the mid-tier build.
- What Is an SDR Transceiver, and Why Does It Matter?
- My HF Radios: Four Radios, Four Very Different Jobs
Where to Go Next
Looking for other radios or a broader buying plan? Head to New Ham? This Is Where You Should Spend Your Money.