Blog

📌 Pinned

All Posts

  • Yaesu FT-857D Review: A Great All-Bander Held Back by Its Own Menu

    Part of our The Yaesu FT-857D: The Complete Guide. Still a Legit All-Bander I picked up the FT-857D for a great price and ran it in both the shack and the field kit, though it never rode in the Jeep. The reputation holds up. It’s a full HF/VHF/UHF all-mode radio, SSB, FM, and the data…

  • The Yaesu FT-857D: The Complete Guide

    The FT-857D is the radio I point people to when they want one box that covers HF, VHF, and UHF without carrying a second radio. It’s not the newest or the friendliest to program, but it earns its keep. This page rounds up everything I’ve written about it. Start Here Comparisons & Buying Guidance MARS…

  • I Bought a Yaesu FT-857D for a Great Price. Here’s Why I Sold It

    I picked up a used FT-857D for a great price, ran it for a while, and decided it wasn’t for me. Here’s what’s genuinely good about it and why I sold it and went back to the FTX-1.

  • Can You Encrypt or Scramble a GMRS Radio? The Legal Reality

    Some GMRS radios ship with a scramble button. That doesn’t mean using it is legal.

  • Tools Every New Ham Should Own for Basic Station Work

    Part of our Building Your First Ham Radio Station guide. You do not need a full electronics bench to get started in this hobby, but a handful of basic tools will save you real frustration on your first antenna build or connector job. The Essentials A good wire stripper sized for the gauges you actually…

  • Installing a Coax Feedthrough Panel for Your Shack Wall

    Part of our Building Your First Ham Radio Station guide. Every antenna feedline has to get from outside to your radio somehow, and a proper feedthrough panel is a small project that solves weatherproofing, grounding, and cable management problems all at once, compared to routing coax through a cracked window or a hastily drilled hole.…

  • Choosing Wire Gauge for DC Power Runs

    Part of our Building Your First Ham Radio Station guide. Undersized wire on a 12V radio power run causes a specific, predictable problem: voltage drop, and it shows up as reduced transmit power, radios that reset under load, or a general feeling that your gear is not performing the way it should. Why Voltage Drop…

  • Fusing Your 12V Ham Shack: A Practical Guide

    Part of our Building Your First Ham Radio Station guide. A 12V shack or vehicle radio setup without proper fusing is a fire risk waiting for the right circumstances, and the good news is that doing it correctly is neither expensive nor complicated once you understand a few basic rules. Fuse the Source, Not Just…

Categories

×