Which of the following methods measures intermodulation distortion in an SSB transmitter?
- AModulate the transmitter using two RF signals having non-harmonically related frequencies and observe the RF output with a spectrum analyzer
- BModulate the transmitter using two AF signals having non-harmonically related frequencies and observe the RF output with a spectrum analyzer correct answer
- CModulate the transmitter using two AF signals having harmonically related frequencies and observe the RF output with a peak reading wattmeter
- DModulate the transmitter using two RF signals having harmonically related frequencies and observe the RF output with a logic analyzer
Answer: B. Modulate the transmitter using two AF signals having non-harmonically related frequencies and observe the RF output with a spectrum analyzer
Feed two audio tones that aren't harmonically related into the transmitter and look at the RF output on a spectrum analyzer.
Learn more: NanoVNA: a budget antenna analyzer · Diagnosing and killing HF noise
More from group E4B: Measurement technique and limitations: instrument accuracy and performance limitations; probes; techniques to minimize errors; measurement of Q; instrument calibration; S parameters; vector network analyzers; RF signals
- E4B01 Which of the following factors most affects the accuracy of a frequency counter?
- E4B02 What is the significance of voltmeter sensitivity expressed in ohms per volt?
- E4B03 Which S parameter is equivalent to forward gain?
- E4B04 Which S parameter represents input port return loss or reflection coefficient (equivalent to VSWR)?
- E4B05 What three test loads are used to calibrate an RF vector network analyzer?
- E4B06 How much power is being absorbed by the load when a directional power meter connected between a transmitter a…
- E4B07 What do the subscripts of S parameters represent?
- E4B08 Which of the following can be used to determine the Q of a series-tuned circuit?
- E4B09 Which of the following can be measured by a two-port vector network analyzer?
- E4B11 Which of the following can be measured with a vector network analyzer?
From the NCVEC public-domain Amateur Extra question pool, 2024-2028 (4th errata, Feb 4, 2026). Explanations by QSO Journey. Practise every question in the free Exam Trainer.
How to Study With the Exam Trainer
The Exam Trainer uses the current NCVEC question pools for all three US license classes: Technician, General and Amateur Extra. I’m a Volunteer Examiner, and the people who pass easily are the ones who drilled the pool, not the ones who crammed a textbook the night before.
- Practice exams are built like the real test: one question from every group in the pool, shuffled.
- Topic quizzes give instant feedback on one section at a time.
- Weak-spot drills keep putting the questions you miss in front of you.
- Study Answers shows only the correct answer, which is a fast way to learn the pool before you start testing yourself.
How many questions do I need to pass?
Technician and General are 35 questions each, and you need 26 right. Amateur Extra is 50 questions, and you need 37 right.
Do I need an account?
Sign in with a site account to keep your scores, pool progress and training history. If you’re already licensed, add your call sign and the classes you’ve passed are marked done, so the trainer opens on your next exam.
When am I ready to test?
When you’re scoring well above passing on several full practice exams in a row, book a session. Getting Licensed covers finding an exam session and what to expect, and the Band Plan shows what each license lets you do.
