One end-fed half-wave wire can be deployed in a surprising number of shapes. Here are the common EFHW configurations and when to reach for each.
The used market is one of the best ways into this hobby without spending full retail. It is also where a surprising number of bad batteries, cracked finals, and misaligned rigs end up. Here is what to actually check.
The FT-891 has no internal tuner, so here’s why the MFJ-939 with the Yaesu adapter cable is the external tuner I actually reach for.
A quarter-wave vertical is only half an antenna. Here is why ground radials matter so much, and how the number and type you use changes your performance.
APRS stands for Automatic Packet Reporting System, and it is one of the oldest pieces of digital ham radio still in daily use. Most operators know it as “the thing that puts a dot on a map,” but that undersells it badly. APRS is a real-time, ham-built data network that has been running continuously since…
The low bands reward patience, big antennas, and staying up late. Working DX on 80 or 160 meters is genuinely one of the most challenging and satisfying pursuits on all of HF.
A simple, cheap half-wave dipole is still one of the best-performing HF antennas you can build. Here’s how to cut, build, and tune one for under $30.
Before you cut a single piece of wire, antenna modeling software can tell you almost exactly how your design will perform, gain, pattern, feed impedance, all of it. EZNEC and 4nec2 are the two names that come up constantly, and they’re both built on the same underlying engine. NEC: the engine underneath both programs Both…
A complete buying guide for new hams, covering radios, test gear, upgrades, and how to buy used gear without getting burned.
Meshtastic gets pitched online as a SHTF communications solution. It’s useful, but it’s not that. Here’s an honest look at where it actually fits in a preparedness plan.